Detailed Product Description

This marine combined chain anchor  windlass by the motor driver, bring about a high transmission efficiency of the gear box, delivered to the spindle, through the electrical control box to control motor and the positive growth rate slow down the completion of the operation of anchoring and windlass. The other side of it there is a Volume used for cable reel, mooring work to be completed through a clutch and a combination of the spindle, the rotating drum driven to complete the retractable cable action. It can be broken down anchor can also be a separate retractable cable. It is also equipped with a side drum mooring for mooring the ship docked to increase greater convenience. At the same time, and it also has a control configuration of its electrical control box.

Its base is from high-strength steel plates welded together, rotating bearing components produced using high quality copper. And hull bolt connections for the installation. Installation convenience. It is the structure of solid and stable, excellent manufacturing quality and low prices. Easy to operate, suitable for a variety of small and medium-sized ship docked mooring

 a.  Achoring Part

      Dia of Chain                  32mm(AM2)

      Working load:                43.5kN

      Rated speed:                 9m/min

      Overload pull:                 65kN

      Holding load:                 139kN

      Quan of wheel:               2

  b.  Drums Part

      Working load:               40kN 

      Rated speed:                12m/min

      Dia of rope:                   26mm

      Capacity for the rope:    190m(6 Layers)

      Quan of drum:               2

c.   Warping part

      Warping pull:               30kN

d.   Motor part

      Type of el-motor            JZ2-H-42-4/8/16 (IP56)

      Power                           11/11/7.5kW

      Rotating speed              1400r/665/300min

     Working duty                  S2

     Voltage                          440V,  60 Hz, 3 Phase