Detailed Product Description

  This marine hydraulic windlass mostly Drive by hydraulic pressure, hydraulic pump provide motives for the system, promote the hydraulic motor running, pass to the pinion gear which installed on motors axle end, pinion gear promote bull gear to slow running. The bull gear connect with principal axis, principal axis running promote gypsy wheel through hand-operated proportional valve to control hydraulic motors positive and reverse rotation, speed-up and speed-down, accomplish the work of drop and weigh anchor.  Its one side equipped with a warpingbarrel, increase greater convenience for ship to moor and dock.

Its base is composed of high-strength steel plates welded together,turn parts bearing use the copper of high quality. The installmethod of shiphull is connect with bolt, installation convenience. Its has sound structure,high quality making,low price,simple operation,suitable for all kinds of small and medium-sized ship to moor and dock.

  Technical specifications

a. Achoring Part

    Dia of Chain                  56mm(AM2)

    Working load:               133kN

     Rated speed:               9m/min

    Overload pull:                199.5kN

    Holding load:                 399kN

    Quan of wheel:                1

 b. Warping part

     Warping pull:               100kN

 c.  Hydraulic motor part

    Type                            IHM31-2800

     2500ml/min

    Rated pressure                  20MPa

    Pressure in fact                 12MPa

    Pressure in over load         18MPa

 d. Hydraulic system part

    Type of el-motor                Y225-4-H×2 (IP44,F )

    Power                               37kW

    Rotating speed                  1420r/min

    Working duty                     S1

    Pumps type                      Q63YCY14-1B×2

   Valve                                 CSBF-G25

Set pressure                22MPa

Rated flowing               80L/min

Oil boxs cubage           320L